Manufacturers of High Quality Heavy Duty Pavement Marking Equipment and Snow Removal Equipment
Manufactured in the USA
Kelly-Creswell Products
Proudly Manufactured
in the USA Since 1937.

Kelly-Creswell Intermediate Series 2000-AL Palletized Airless Striper

The Kelly-Creswell 2000-AL is a self contained airless center & edgeline striping machine offering speed and performance of a full sized unit at a fraction of the cost.
Fits in a one ton fleet side or flat bed truck and is easily removable allowing the truck to be used for other vocations.
Two high capacity 60 gallon paint tanks and a 15 gallon cleaner tank make in field color changes a snap.
Operate one and you will understand why Kelly-Creswell is the name that has defined striping since 1937.
2000-AL Palletized Airless Striper
  • Optional airport package for application of 36” lines.
  • 8.6 GPM hydraulic powered, high pressure airless spray system.
  • Reversible gun carriage for painting both center & edgelines.
  • Rack & pinion carriage steering standard, optional hydraulic
  • Mark 40D skip line controller with footage counters
  • 750 lb. pressure glass bead system
  • Pneumatic carriage lift
  • Two KC-700 automatic airless spray guns and two KC-600 glass bead guns standard.
Self contained center & edgeline striper
Self contained center & edgeline striper
Airless paint system, optional agitators
Airless paint system, optional agitators
Simple to operate M40D skipline control
Simple to operate M40D skipline control
Optional drums & hydraulic power steer
Optional drums & hydraulic power steer
Pointer assembly
Pointer assembly
Permanent mount with fixed carriage
Permanent mount with fixed carriage
Cities, state agencies, contractors and airports for application of center & edgelines and  airport markings.  Standard unit  equipped with two paint and bead guns for automatic application of traffic patterns in both U.S. and metric units.
Features & Performance of a full sized striper at a fraction of the cost.  
Easily Removable: installs in a one ton fleet side pickup or larger flat bed chassis, easily removable allowing the chassis to be used for other vocations.
Quick color change: KC exclusive on board 15 gallon solvent tank for quick daily flushing of pump and guns and quick in field color changes. (std)
Pneumatic carriage lift: keeps operator out of traffic and increases productivity. Quickly & safely raise and  lower the spray gun carriage with the flip of a switch. (std)      
Steerable & reversible carriage:  Paint both center and edgelines with the 2000 series. Rack/ pinion power  steering enables rear operator to adjust gun carriage on the fly. (std)
Convenient Controls:  Operators rear control panel is standard equipment  and includes main air pressure gauge, hydraulic pressure gauge, bead tank pressure gauge, bead tank pressure regulator, hydraulic pressure reducing valve all within easy reach of the operator.
Mark 40D Skipline Control: Electronic skipline control counters is simple to operate, with many features including advance/retard, auto calibration and footage counters. (std)
Capacity:  With 120 gallons of paint and 750 lbs. of bead storage the 2000-AL paints up to 7.5 miles of single 4” line at 15 mils.
Airport Striping Package:  Optional equipment  for application of 36” line for runways.  
Key Component Manufacturer:  Kelly-Creswell is the manufacture of critical components including Mark 40D skipline controller, KC-700 airless paint gun, KC-600 bead gun. Operational and technical assistance direct from the manufacturer.
2000-ALPallet mounted road striper
AC-2150-1Agitators, two each hydraulic powered paint vat agitators, SS
AC-2120Additional paint and bead gun for quick in field color changes
AC-2145Hand paint gun for remote stenciling with 50’ hose
AC-1040-1Hand pressure bead gun with 50’ hose
AC-2060-2Diaphragm loading pump, hoses on two wheeled cart
Frame:Channel iron, welded construction
Outrigger:movable to either side, rack & pinion steering with 36” travel
Carriage:pneumatic lift with transport lock
Engine:GX620 20 HP Honda with electric start
Compressor:13.1 CFM cast iron with head un-loader
Hydraulic Pump:pressure compensated, 12 GPM
Paint Pump:hydraulic powered, 8.6 GMP
Paint Filter:high pressure, with replaceable screen
Bead Tank:750# with 10” Lid
Paint Tank:two 60 gallon zero pressure
Cleaner Tank:15 gallon plumbed to pump inlet
Paint Guns:(2)KC-700 with reverse-a-clean tips
Bead Guns:(2)KC-600 or KC Nightliner
Seat:adjustable base, arm rests with seat belt
Skipline Control:KC Mark 40D with footage counters
Warranty:one year parts & labor
Stainless Steel Tanks:plumbing (Latex Paint)
Paint Drum Holders:in lieu of paint tanks/cleaner tank
High Capacity:paint tanks (carbon & stainless steel)
Agitators:hydraulic tank mounted, hydraulic drum lid
Timed beads:separate actuation solenoids
Hydraulic Steering:36” cylinder w/ steering wheel
Permanent Mount:750with fixed carriage(s)
Hose reels:for optional hand paint & bead guns
Additional Paint Pump:two color operation
Paint Loading:diaphragm operated pump
Additional paint and bead guns 
Laser Guided Pointer 
Hand paint and bead gun 
Pole Gun with wheels 
Vacuum bead loading 
Airport Striping Package 
Storage Cart 
Coming Soon
Files served in this tab are saved as Adobe® PDF files. To view these files you will need freely available Adobe® Reader®. You can download freely available Adobe® Reader® by selecting the image below.

If you have problems opening the files below because of your pop-up blocker settings, right click on the document of interest and select the Save Target As... option to download a copy of the document.

2000-AL Brochure
File Type: PDF | Size: 200 KB | Description: Brochure for the 2000-AL Intermediate Palletized Striper
2000-AL Specifications
File Type: PDF | Size: 1674 KB | Description: Specifications for the 2000-AL Intermediate Palletized Striper
2000-AL Basic Drawings
File Type: PDF | Size: 1396 KB | Description: Basic Drawings for the 2000-AL Intermediate Palletized Striper