Kelly-Creswell
Kelly-Creswell
Manufacturers of High Quality Heavy Duty Pavement Marking Equipment and Snow Removal Equipment
Manufactured in the USA
Kelly-Creswell Products
Proudly Manufactured
in the USA Since 1937.

Kelly-Creswell Intermediate Series WV-50C-AL Self Propelled Airless Striper

The Kelly-Creswell WV-50C-AL is a self contained, single operator center & edgeline highway striping machine.
Striping speeds up to 10 mph, over the road speeds of 25 mph.
Operates in own lane of traffic maintaining traffic flow.
Compact, maneuverable offering features and performance of larger truck mounted units at an affordable price.
Operate one and you will understand why Kelly-Creswell is the name that has defined striping since 1937.
WV-50C-AL Self Propelled Airless Striper
WV-50C-AL Self Propelled Airless Striper
  • 50 gallon paint tank.
  • 250 lb. pressure bead tank.
  • 3.1 GPM hydraulic high pressure airless spray system.
  • Reversible gun carriage with pneumatic lift.
  • Mark 40D skip line controller with footage counters
  • (2)KC-700 with reverse-a-clean tips, (2)KC-600 bead guns
  • Telescoping pointer with rubber drag strap
Self contained center & edgeline striper
Self contained center & edgeline striper
Maintains traffic flow, 10' turning radius
Maintains traffic flow, 10' turning radius
Operators station with great visibility
Operators station with great visibility
Rugged dual wheel gun carriage
Rugged dual wheel gun carriage
Reversible gun carriage
Reversible gun carriage
Simple controls
Simple controls
APPLICATIONS
Cities, state agencies, contractors and airports for application of center & edgelines and  airport markings. Standard unit  equipped with two paint and bead guns for automatic application of traffic patterns in both U.S. and metric units.    
KEY SELLING POINTS
Single Operator:  Requires only one operator for application of both center and edgelines.
Maintains Traffic Flow: The WV50C-AL operates in its own lane of traffic  while maintaining traffic in adjacent lanes and has a maximum over the road speed of 25 MPH.
Maneuverable:  WV-50C-AL easily changes directions on a two lane city street or rural    road with a turning radius of less that 11feet.
Features & Performance of a full sized striper at a fraction of the cost.  
Reversible carriage for painting both center and edgelines.
Pneumatic carriage lift:  operator can  raise the gun carriage and quickly move between jobs without leaving the operators seat. (std).  
Convenient Controls:  Operators control panel located directly behind the operator seat features main air pressure gauge, hydraulic pressure gauge, bead tank pressure gauge, bead tank pressure regulator, hydraulic pressure reducing valve all within easy reach of the operator.
Mark 40D Skipline Control: Electronic skipline control  is simple to operate, with many features including advance/retard, auto calibration and footage counters. (std)   
Airport Striping Package : Optional equipment  for application of 36” line for runways.
Key Component Manufacturer : Kelly-Creswell is the manufacture of critical components including M40D skipline controller, KC-700 airless paint gun, KC-600 bead gun. Operational and technical assistance direct from the manufacturer.
 
TYPICAL CONFIGURATIONS & OPTIONAL EQUIPMENT
WV-50C-ALRide on striper, 50 gallon plastic paint tank, two each paint & bead guns.
AC-3010Permanent edgeline carriage with paint and bead gun.
AC-3030Dual 25 gallon stainless steel paint tank in lieu of single 50 gallon plastic.
AC-2145Hand paint gun for remote stenciling with 50’ hose
AC-1040-1Hand pressure bead gun with 50’ hose
AC-2060-2Diaphragm loading pump, hoses on two wheeled cart
AC-3080Automatic three speed transmission in lieu of manual.
 
SIMILAR EQUIPMENT
2000-AL Palletized Striper and WV3-AL-120 Truck Mounted striper
Carriage:Reversible, pneumatic lift with transport lock
Engine:GX630 20 HP Honda with electric start
Fuel Tank:15 US Gallon with vented fill cap
Compressor:13.1 CFM cast iron with head un-loader
Hydraulic Pump:Pressure compensated, 12 GPM
Paint Pump:Hydraulic powered, 3.1 GPM
Paint Filter:Low & high pressure paint filtration
Pain Plumbing:All stainless steel
Bead Tank:250 lb. with 10" lid
Paint Tank:50 US gallon zero pressure
Paint Guns:(2) KC-700 with reverse-a-clean tips
Bead Guns:(2)KC-600 with adjustable shroud
Skipline Control:Kelly-Creswell Mark 40D with footage counters
Ponter:Telescroping with rubber drag strap
Warranty:one year parts & labor
  
Chassis Specification 
Model:Cushman Haulster
Payload:2400 lb.
Engine26 HP water cooled gasoline engine
Transmission:5 speed manual with reverse
Stainless Steel Tank:in lieu of plastic
Agitators:hydraulic powered, requires SS tank option
Hose reels:for optional hand paint & bead guns
Additional paint pump:two color operation
Paint Loading:diaphragm operated pump
High Capacity:8.6 GPM Paint Pump
Spare Parts Kit:recommended parts inventory
Laser Guided Pointer 
Hand paint and bead gun 
Airport Striping Package 
Transportation Trailer 
Coming Soon
Files served in this tab are saved as Adobe® PDF files. To view these files you will need freely available Adobe® Reader®. You can download freely available Adobe® Reader® by selecting the image below.

If you have problems opening the files below because of your pop-up blocker settings, right click on the document of interest and select the Save Target As... option to download a copy of the document.

WV-50C-AL Brochure
File Type: PDF | Size: 240 KB | Description: Brochure for the WV-50C-AL Ride-on Airless Striper
WV-50-CAL Specifications
File Type: PDF | Size: 633 KB | Description: Specifications for the WV-50C-AL Ride-on Airless Striper
WV-50-CAL Basic Drawings
File Type: PDF | Size: 384 KB | Description: Basic Drawings for the WV-50-CAL Ride-on Palletized Striper