Kelly-Creswell Truck Series WV3-AL Airless Striper

Striping Equipment > Truck Mounted > WV3-AL

Overview
Key Selling Points
Specifications
Optional Equipment
Photos
Videos
Literature

The Kelly-Creswell WV3-AL is a self contained, simultaneous center & edge line striping machine offering speed and performance for municipal & highway striping.

Sizes from 120 gallon thru 700 gallon total paint capacity.

Heavy-duty outriggers with UMHW wear strips that never need lubrication with a full 48" of travel.

Rugged gun carriages with pneumatic lift with auto transport lock keeping operators out of harms way.

8.6 or 12.9 GPM hydraulic powered airless paint pumps.

KC-700 spray guns, KC-600 or Nightliner bead guns.

Let us engineer a striper to meet your specific requirements.

Operate one and you will understand why Kelly-Creswell is the name that has defined striping since 1937.

WV3-AL Airless Striper

Rugged gun carriage with pneumatic lift

Simultaneous center & edge line striping

Hydraulic powered airless paint pumps

Mark 40D Skipline Controller

Hydraulic pointer assembly

Optional drum holders in lieu of tanks

APPLICATIONS

Cities, state agencies, contractors and airports for application of center & edge lines and airport markings. Standard unit features a two color high pressure airless paint system, pressurized reflective bead delivery and hydraulic steerable gun carriages for simultaneous application of center and edge lines. The WV3 series automatically applies traffic patterns in both U.S. and metric units.

KEY SELLING POINTS

Quality & Performance: WV3 series is built using the highest quality components and engineered to offer highest performance and reliability available in truck mounted stripers.

Airless Paint System: WV3-AL is equipped with high pressure hydraulic powered reciprocating airless paint pumps available in two sizes 8.6 & 12.9 GPM.

Mark 40D Skipline Control: Electronic skipline control is simple to operate, with many features including advance/retard, auto calibration and footage counters.

Key Component Manufacturer: Kelly-Creswell is the manufacture of critical components including M40D skipline controller, KC-700 airless spray guns, KC-600 & Nightliner bead guns. Operational and technical assistance direct from the manufacturer.

Auxiliary Diesel Engine: powers the hydraulic pump for the airless paint system and insures adequate oil supply regardless the speed of the chassis. KC exclusive mono-block hydraulic valve makes maintenance and troubleshooting simple.

Airport Striping Package: Optional equipment for application of 36” lines for runways.

Simple Operation: From the deck layout to the location of critical controls, the WV3 series is engineered for simple operation insuring maximum productivity.

Experience: since 1937 Kelly-Creswell has been manufacturing line painting equipment. Let us engineer a truck mounted striper to meet your specific needs.

TYPICAL CONFIGURATIONS & OPTIONAL EQUIPMENT

WV3-AL-120(2) 60 gallon paint tanks, 750# bead tank, 19,000 lb. GVW chassis

WV3-AL-240(2) 120 gallon paint tanks, 1,600# bead tank, 26,000 lb. GVW chassis

WV3-AL-500(2) 250 gallon paint tank, 3,000# bead tank, 33,000 lb. GVW chassis

Totes or drums in lieu of paint vats.

Paint heating equipment

Directional arrow-board or message board.

Hand paint and pressure bead gun for remote stencil work.

Night lighting package.

Operators enclosure with heat and AC.

Laser Pointer.

SIMILAR EQUIPMENT

WV3-AL Truck mounted striper, 2000-AL pallet mounted striper and WV-50C-AL Ride on striper

WV3-AL-120

Chassis:19,000 lb. COE, UD model 1900

Auxiliary Engine:24 HP Honda (gasoline) optional diesel

Compressor:12 CFM

Paint Pumps:(2) 8.6 GPM hydraulic powered

Paint Tanks:(2) 60 gallon with agitators

Bead Tank:750 lb.

Cleaner Tank:20 gallon

Paint & Bead Guns:KC-700, KC600 or Nightliner

Controller:(2) Kelly-Creswell Mark 40D

Outriggers:KC standard, one centerline, one edge line

Center Carriage:3 paint & bead guns

Edgeline Carriage:1 paint & bead gun

WV3-AL-240

Chassis:26,000 lb. COE, UD model 2600

Auxiliary Engine:83 HP Kubota diesel

Compressor:60 CFM rotary screw, hydraulic powered

Paint Pumps:(2) 12.9 GPM hydraulic powered

Paint Tanks:(2) 120 gallon with agitators

Bead Tank:1600 lb. with vacuum loading

Cleaner Tank:20 gallon

Paint & Bead Guns:KC-700, KC-600 or Nightliner

Controller:(2) Kelly-Creswell Mark 40D

Outriggers:KC standard, one centerline, one edge line

Center Carriage:3 paint & bead guns

Edgeline Carriage:1 paint & bead gun

WV3-AL-500

Chassis:33,000 lb. COE, UD model 3300

Auxiliary Engine:24 HP Honda (gasoline) optional diesel

Compressor:60 CFM rotary screw, hydraulic powered

Paint Pumps:(2) 12.9 GPM hydraulic powered

Paint Tanks:(2) 250 gallon with agitators

Bead Tank:3000 lb. with vacuum loading

Cleaner Tank:30 gallon

Paint & Bead Guns:KC-700, KC-600 or Nightliner

Controller:(2) Kelly-Creswell Mark 40D

Outriggers:KC standard, one centerline, one edgeline

Center Carriage:3 paint & bead guns

Edgeline Carriage:1 paint & bead gun

Warranty:one year parts & labor

Detailed specs:Click here to jump to literature tab

Stainless steel tanks & plumbing (latex paint)

Paint heating system

Gallon counters

Additional paint & bead guns

Laser guided pointer

Camera guidance system

Arrow board with lift

Strobe lights

Night lighting package

Click on picture to see larger image

WV3-AL is a self contained center and edgeline striping machine offering speed and performance for contractor, municipal and highway striping.

WV3-AL truck mounted stripers are available in capacities of 120 gallons thru 700 gallons, zero pressure paint vats pictured

Simple design and rugged components insure long service life back by Kelly-Creswell's over 70 years experience manufacturing highway line marking equipment

WV3-AL is available in paint drum suction as pictured, zero pressure paint vat and tote configurations.

WV3-AL features a simple operators console to control paint and pressure bead system.

WV3-AL is equipped with heavy-duty hydraulic powered outriggers and pneumatic lift gun carriages with automatic transport lock.

WV3-AL is equipped with hydraulic powered high pressure airless pumps available in two sizes, 8.6 GPM & 12.9 GPM.

WV3-AL is equipped with a high capacity basket type paint strainer to catch an foreign material or skins before paint enters the high pressure pumps. The filter are positioned below the deck for easy access and maintenance.

WV3-AL can be equipped drum suction sytem with either pneumatic (as pictured) or hydraulic drum agitators to stir paint.

WV3-AL comes stadnard with zero pressure paint vats and they can be equipped with hydraulic agitators as pictured to agitate paint.

WV3-AL is equipped with a proven hydraulic system with a single monoblock valve assembly.

WV3-AL feature KC-700 automatic spray guns, optional Graco & Binks available

WV3-AL can be equipped with KC Nightliner bead guns as pictured, KC-600 or Binks Model 30 bead guns.

WV3-AL features a direct coupled dual pump hydraulic system, with one pump dedicated to the paint system and the second to powering the air compressor.

WV3-AL is equipped with two Mark 40D skipline controller with digital speed-o-meter and footage counters.

WV3-AL-240 equipped with four each drum holders, 1,500# pressure bead tank, two each 12.9 GPM high pressure paint pumps, powered by a Kubota 87 HP diesel engine

WV3-AL-240 equipped with dual carriages behind the rear wheels, KC-700 automaic airless spray guns and KC- Nightliner bead guns, built on a UD-2600 chassis.

WV3-AL-240 equipped with optional rear operators canopy, directional arrow board and pneumatic drum agitators.

WV3-AL-300, two each 120 gallon zero pressure paint vats, 1,500# pressure bead tank, two each 12.9 GPM high pressure airless paint pumps, built on Isuzu 26,000 GVW chassis.

WV3-AL-500, three color airless system built on 33,000# conventional chassis.

WV3-AL-500, two each 250 gallon zero pressure paint vats, 3,000# pressure bead tank, diesel fired paint heating sytem, two each 8.6 GPM high pressure airless paint pumps.

WV3-AL-500 equipped with two gun carriages between front and rear axle,, KC-700 airless paint guns, KC-600 pressure bead guns, optional operators cab (old style), two each double diaphragm loading pumps.

WV3-AL equipped with optional night lighting package, built on Ford 33,000# GVW chassis.

WV3-AL-500 equipped with two each 250 gallon zero pressure paint tanks, 3,000# pressure bead tank, 85 HP auxilary diesel engine, two 8.6 GPM high pressure airless paint pumps.

WV3-AL centerline gun carriage in action.

WV3-AL-500 dual gun carriages behind the rear wheels, KC-700 automatic airless spray guns, KC-600 pressure bead guns, dual 2 inch double diaphragm loading pumps, built on Ford 33,000# GVW chassis.

WV3-AL-120 Airport. Two each 60 gallon zero pressure paint vats, two each 8.6 GPM high pressure airless paint pumps, 35 HP Kubota diesel engine, 18 CFM air compressor

WV3-AL-120 Airport, equipped with a special front mounted carraige for applying solid 36 inch line and double lead lines. The unit is a one man operation and equipped with Mark 40 skipline contoller for automatic placment of dashed lines.

WV3-120-AL Airport, simple design rugged parts insure long service life back by Kelly-Creswell since 1937.

Files served in this tab are saved as Adobe® PDF files. To view these files you will need freely available Adobe® Reader®. You can download freely available Adobe® Reader® by selecting the image below.

If you have problems opening the files below because of your pop-up blocker settings, right click on the document of interest and select the Save Target As... option to download a copy of the document.

WV3-AL Brochure
File Type: PDF | Size: 215 KB | Description: Brochure for the WV3-AL Airless Striper Truck

Specifications available upon request

WV3-AL 12O WSD Basic Drawings
File Type: PDF | Size: 124 KB | Description: Basic Drawings for the WV3-AL 12O WSD Truck Mounted Striper

WV3-AL 240 WSD Basic Drawings
File Type: PDF | Size: 148 KB | Description: Basic Drawings for the WV3-AL 240 WSD Truck Mounted Striper

WV3-AL 500 WSD Basic Drawings
File Type: PDF | Size: 144 KB | Description: Basic Drawings for the WV3-AL 500 WSD Truck Mounted Striper